Subject:  DOC: Non-Tandy HD on 1000 SX
Author:  ROBNAN503
Uploaded By:  PCA Glenn
Date:  3/3/1996

File:  tandy1.txt (2473 bytes) 
Estimated Download Time (60658 baud):  < 1 minute
Download Count:  665

Equipment:  Soldering iron, Western Digital WX1 or WX2 controller 
Needs:  An ASCII file listing program

Keywords:  ROBNAN503, Modification, Text, Hard drive

Type:      Public Domain

This file tells how to modify a Western Digital WX1 or WX2 controller card to be compatible with the older Tandy 1000 SX machines.  Since the SX used different interrupt routines, a standard card will not operate correctly.  This tells how to correct that.

Note:  In addition to this ASCII text file, you will need a little technical knowledge. This file was sent to me by ROBNAN503.  It is similar to a doc sheet I have at work explaining the same modification, and I have tested this to work properly.  However, if you are not technically oriented, or are not very accurate with a soldering iron, have someone else do the changes for you, as you can damage your system if this is done improperly.